Description

Handheld hot knife foam cutter with 150mm blade is suitable for cutting different density foam at about 150mm thickness with fine cutting edge and no mess. This electric foam cutter is used to cut Styrofoam and similar kind of materials for artwork, packing, building, sculpture, and other applications.

Features

Designed for cutting small quantities, short-time use only.
Max. cutting thickness is 150mm
Hot knife heats up in seconds and up to 400°C.
With 16 steps adjustment to control temperature
Optional groover- sled for cutting, make it easy to groove different shapes on the foam.

Specification

Model	ATO-FC150
Voltage	AC 230V/50Hz or 120V/60Hz
Power	Max. 150W
Intermittent Operation	1/4 min
Adjustable Knob	16 steps
Temp. of Blade	up to 500℃ in seconds
Power Cord Length	3m
Power Plug (Optional) *	US/Europe/UK/Australia
Product Weight	400g
Product Size	2605035mm
Package Included (Optional)	1#. Foam Cutter + Straight Blade 150mm + Brush + Plastic Tool Box + User Manual 2#. Foam Cutter + Large Groover- sled + Flexible Blade 305mm + Straight Blade 150mm + T-square + Brush + Plastic Tool Box + User Manual 3#. Foam Cutter + Small Groover- sled + Flexible Blade 305mm + Straight Blade 150mm + Brush + Plastic Tool Box + User Manual 4#. Foam Cutter + Cutting Guider + Straight Blade 150mm + T-square + Brush + Plastic Tool Box + User Manual 5#. Foam Cutter + Large/Small Slotted Plate + Cutting Guider + Blade Holder (for sculpture) + Flexible Blade 305mm + Straight Blade 100/150mm + T-square + Brush + Plastic Tool Box + User Manual

Note:

* Usually, the foam cutters with UK/Australia need longer delivery time (5-10 days).

Foam Cutter Accessories

Note: If you need any extra accessories that is not included in the package, please contact us.

Tips: Foam Cutter Classification

There are mainly two types of foam cutters on the market. One type is relatively simple, that is, the foam cutter is installed a heating wire that can be heated after being energized. The advantages of this hot knife foam cutter are low cost and simple structure. The disadvantage is that the preheating is slow, which can only be used to cut foam products.

The other type is a handheld hot knife foam cutter that uses a resistor of the blade to achieve heat generation through a large current. This electric hot knife has a short warm-up time, and the blade can reach the red state within a few seconds, high efficient. The advantages of this electric hot knife are fast preheating, high efficiency (heating directly with the blade, small loss), fast speed, and variable shape. You can choose different power blades according to different applications, which can be used to foam, sponge, plastic, chemical fiber cloth, non-woven fabric, filter cloth, plastic rope, rubber, telescopic woven mesh tube, etc. low melting point products.