Description
The photoelectric label sensor supports 12-24VDC wide range power input, has an operating temperature range of -20~60℃ and IP65 protection level, and is widely used in automated packaging and printing equipment such as label positioning and transparent label detection.
Specification
| Model | NPN | ATO-LAP-TR03TNB | ATO-LAP-TR03TNB-F3 |
| PNP | ATO-LAP-TR03TPB | ATO-LAP-TR03TPB-F3 | |
| Connection | 2m 3 pins cable | 25cm cable + M8 connector | |
| Slot width | 3mm | ||
| Slot depth | 60mm | ||
| Label minimum spacing | ≥2mm | ||
| Light source | Infrared light (940nm) | ||
| Response frequency | Max 10kHz | ||
| Label passing speed | ≤20m/min (0.3m/s) | ||
| Response time | ≤50μs | ||
| Delay after startup | ≤300ms | ||
| Supply voltage high/low | 12-24VDC (Ripple≤15%) | ||
| Current consumption | ≤30mA | ||
| Warning output | Red indicator light on | ||
| Switch output function | Light on/ dark on (Switchable) | ||
| Voltage drop | ≤2V | ||
| Output current | ≤10mA | ||
| Indicator | Red light: Calibration error/operation error; Green light: NO NC; Blue light: detect label switch output signal | ||
| Operation temperature | -20-60℃ (No icing, no condensation) | ||
| Storage te mperature | -30-70℃ | ||
| Protection degree | IP65 | ||
| VDE safety level | Ⅲ | ||
| Weight | Approximately 55g (100g with wire) | ||
| Material | Zinc die casting; surface electroless nickel plating (Silver); PC plastic |
Dimension (Unit: mm)
Wiring diagram
Tips: Precautions for using photoelectric label sensor
- Make sure the power supply voltage is within the rated range before powering on.
- The sensor can detect normally after 100ms of power on.
- When the sensor and the load use different power supplies, please make sure to turn on the power of the sensor first.
- When the sensor is not in use, it is recommended to cut off the power on the load first, and then cut off the power on the sensor.
- Do not subject the sensor to severe external force (such as hammering, etc.) during installation to avoid damaging the sensor performance.
- Avoid using thinners, alcohol or other organic solvents when cleaning.
Reviews
There are no reviews yet.