Cast Iron Gate Valve 2 Inch NPT

Description

• 2 Inch NPT Inlet: Fits drums and barrels with a standard 2 inch bung opening.
• Fast Flow Control: Helps dispense thick liquids quickly without heavy splashing.
• Cast Iron Body: Gives you a rugged valve for tough shop and industrial use.
• Brass Faceplate: Provides smooth operation and helps create a tight seal.
• Angled Discharge Opening: Directs flow downward for cleaner liquid dispensing.
• Manual Handle: Short formed-steel handle gives simple on and off control.

2 inch cast iron gate valve for drums and barrels gives you fast flow control for thick, non-flammable liquids stored in non-pressurized containers. This standard gate valve fits a 2 inch NPT bung opening and helps you dispense viscous fluids with less splashing, less waste, and better control during daily use.

This cast iron drum gate valve is built for heavy work areas where plastic faucets may not be strong enough. The large, nearly straight bore lets thick liquids move more freely, while the oval discharge opening helps guide the flow. That makes it useful for oils, syrups, lubricants, and other thick liquids that pour slowly.

The angled outlet helps reduce messy splashing when you’re filling pails, pans, or smaller containers. You can open and close the short metal handle by hand, giving you simple control without extra tools. The glossy black lacquer finish also adds a clean look while helping protect the valve body.

A machined and lapped brass faceplate supports smooth movement and a reliable seal. This matters when you need clean shutoff after each use. The valve is made for ambient room temperature use only and should be used with compatible non-flammable viscous liquids that meet the minimum viscosity requirement.

This standard 2 inch cast iron gate valve is a practical choice for maintenance shops, plants, warehouses, farms, and fluid storage areas. It helps workers dispense thick liquids from drums and barrels with more control than an open bung or basic faucet. Use it only with non-pressurized containers and approved compatible fluids.

This valve works best when you need controlled flow from a drum without tipping or lifting the container. It can help reduce spills during transfer jobs and make thick liquid dispensing easier for one person. The 2 inch NPT inlet connects to many standard drum bung openings, making it a useful replacement or upgrade valve.

The valve is intended for liquids with a minimum viscosity of 2,000 cPs. That means it is made for thicker products, not thin liquids like water or solvents. Do not use it for flammable liquids, fuels, strong chemicals, or pressurized containers. Always check fluid compatibility before use.